Part 1 is the part with Go Pro Interface (Right). Part 2 is the Other side of the Mount (Left)
1. Remove 2 bolts from Part 1 that hold it to Part 2 
2. Place AirTag into Part 2 with the silver Apple Logo face up
3. Place Part 2 between the saddle and the rails in the position you wish to install
4. Fit Part 1 over Part 2, keeping in mind that the weather sealing lip on Part 1 needs to fit into the groove in Part 2.
5. Insert and tighten bolts removed in step 1. Use no more than 3nm
Important! Tighten Go Pro style mount only with both pieces inserted. 1-2nm only.
Thank you for your purchase!

You may also like

Back to Top